D-GAQ FUEL DISPENSER

D-GAQ FUEL DISPENSER

FlowMeter Type: Optional

Accuracy : ±0.2%

Pressure Loss (kg/cm) :Under 0.25

Motor Voltage(V) :110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle: Auto Shut-off Nozzle

Environmental Condition: -40~~+55degree

Control Type : Solenold Vale Control Type

Preset : Function Provided(Small LCDIndicator)

Display(Counter): Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Optional Display :Type LCD and Bright Backlight

Digit of Volume : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price: 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Totalizer: 1~~9,999,999

Hose:4.5m

Weight :280kg.

Dimension(L×W×H) :900*620*2180(mm)

Dimension(L×W×H)Of Qty of Container: 40ft: 45 20ft: 22

at random; Select filling types through keyboard; Renew select or cancel the filing operation through keyboard as long as nozzle hasn’t been hold; Supporting various applications When IC card includes many applications, give prompt to user; System supports customer’s various applications; No restriction among applications Automatic balance Calculating turnover in line with the accuracy stipulated in JJG443-98 Metrological appraisal regulation for vehicle fuel dispenser; Turnover automatically is deducted from IC card Automatic generation and saving of deal record Automatically generate filing record after each operation; Ensure the safety of MAC value that used to store and transmit data after record; Each filling unit at least store 1,000 pieces of records; Transmit deal record to centre controller in prescribed time (less than 10s) when fuel dispenser and centre controller is in communicating state; Write deal information needed into IC card according to presetting system requirements; Safety secrecy Both fuel dispenser and terminal are verified interac fuel dispenser tively; fuel dispenser Validity of fuel dispenser should be inspected; Personal identification of IC card password; Automatically set IC card to be grey card as filling start; TAC and CTC are automatically generated as money deduction, meanwhile erase grey sign; Grey card solution Suddenly pull out IC card will lead to grey sign; if quickly insert IC card into fuel dispenser, system will automatically finish deduction and erase grey sign; When communicated with centre controller, grey IC card is taken off grey sign on each fuel dispenser that on-line centre controller; As filing station that has formed grey card has finished data exchange with data center, any IC card with grey sign is able to deal with on any IC card fuel dispenser that has successfully finished data exchange with data center and is on line. Black card solution IC card fuel dispenser is able fuel dispenser to store at least 20,000 blacklists; Able to identify all black cards; Aut

s at the POS and is accountable for the money in the cash　　 drawer.　　Customer Person who brings the item(s) to the POS and who wishes to purchases it (them).　　POS The application (or device) that allows the Cashier to enter transactions into the　　 system.　　EPS The application that manages the card payment application.　　Main Flow Description　　1. Customer brings the loyalty card and payment card to the POSOPTCRIND to link them.　　2. Cashier at the POS or the customer himself at the OPTCRIND selects the functionality.　　3. If POS fails the process is aborted and the cashier has to recover the POS (OPTCRIND not　　 available until that).　　4. POS requests to EPS the link to loyalty operation.　　5. If message invalid it is repeated or the process is aborted and the cashier receives a specific　　 alarm. POS is still at the initial status.　　6. EPS gets loyalty card data　　7. EPS gets payment card data　　8. EPS authorises both card (not relevant where fuel dispenser or how fuel dispenser this is performed).　　 a. EPS asks for additional data　　 b. EPS performs any checkfunctionality according to cardconfigurationsystem　　 status　　 c. EPS provides the confirmation to be printed.　　9. If EPS gets into an exception status transaction not possible to complete the transaction　　 gives a negative response.　　10. If POS fails to receive a response from EPS (EPS failure) it is up to an exception procedure　　 to understand if the link was successful or not.　　11. If EPS tells POS the PIN change response but POS has failed (e.g. fails to get the　　 acknowledge) it is up to an exception procedure to understand if the link was successful or　　 not.　　12. If completed EPS tells POS the link result (positive or negative).　　13. If available POS (OPTCRIND) is back t fuel dispenser o normal status.　　3

er, lighter, stranger The engineers who have to make the towers stand up, can build taller and stranger shapes only when technology permits. Three sorts of changes have shaped the current wave of skyscraper design materials, lifts and computing. New materials have the most visible effect on skyscrapers looks. In 1922 Ludwig Mies van der Rohe, a German architect who later moved to America, sketched a tower with a glass skin stretched around the floors of a translucent building that appeared to have no central core. Not only would the building have fallen down, but it would have been impossible to make glass panels that were light enough or that could have been bent into the shapes that the design demanded. “It has taken 80 years for glass technology to catch up with what Mies was sketching,�says Neven Sidor, of Grimshaw Architects. Translucent towers, which aside from looking pretty also alleviate one of the worst things about skyscrapers—the long shadows they cast on the streets below—are now proposed by architects everywhere. Thin-film technology (coating th fuel dispenser e glass fuel dispenser in glazes that repel heat, but let in light) and self-cleaning glass are becoming standard. And glass can be formed into shapes that now make Mies s conceptual design look rather conservative, as at 30 St Mary Axe in London (better known as the “gherkin� or the Hearst building in New York. Other changes to materials have helped towers weigh less, which allows them to go higher. Floors and walls have become thinner, thanks to innovations like slim-line insulation made of fibreglass and aluminium foil, an idea borrowed from containers used to transport blood. This brings its own problems, though. When a floor is really large, thin ones become like trampolines and engineers have to find ways to prevent the journey to the photocopier from becoming too bouncy. Architects are also grappling with Mies s other idea dispensing with the central core fuel dispenser , or breaking it up. Skyscrapers up to 200 metres tall can stand up