D-GB66Q FUEL DISPENSER

D-GB66Q FUEL DISPENSER

FlowMeter Type : Optional

Accuracy :±0.2%

Pressure Loss (kg/cm): Under 0.25

Motor Voltage(V) :110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle :Auto Shut-off Nozzle

Environmental Condition :-40~~+55degree

Control Type : Solenold Vale Control Type

Preset : Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume :0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Optional Display Type: LCD and Bright Backlight

Digit of Volume : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Totalizer :1~~9,999,999

Hose: 4.5m

Weight: 405kg

Dimension(L×W×H) : 1270 x 620 x 2420(mm)

Dimension(L×W×H)Of Qty of Container : 40ft: 28 20ft: 13

layers of oil resistance and erosive resistance. Single thread and aluminum wire are prohibited. Diagram 5-7: Wiring in TN-S Power supply system The connection between fuel dispenser and distributing room adopts bushing-pipe burry, preventing vehicle crush wires. The wire pipe installed at bottom of fuel dispenser should have downward elbow in case oil pouring into and erode wire. No jointer is set between the pipeline of junction box and wire outlet, in case of sparkle jeopardy. User’s wire should correspond to earthing line and power lines after importing exploision-proof junction box. Tighten nut and clamp wires ensuring the explosion-proof performance. Change one of three wires if motor does not work. If adopting TN-S power supply system, wiring from switchboard are connected as diagram 5-7 i fuel dispenser llustration. If adopting TN-C-S OR TN-C system, wiring as Diagram 5-8. Grounding of fuel dispenser is in well condition. It is to adopt brass wire with PVC insulting bushing as communicating line between fuel dispensers. Communicating fuel dispenser line is buried in galvanized pipe. Diagram 5-8: Wiring in TN-C-S or TN-C Power supply system Fuel dispenser should set single earthing line, with resistance no more than 4Ωto earth, 10 Ωnozzle to earth. User’s wire should adopt copper line with no less than 6mm2 section in single phase motor. Otherwise, there is something wrong with motor, even resulting in electric trouble. Diagram 5-9: Wiring Diagram of Communicating Box Article II Submersible pump type dispenser and its installation Compared with fuel dispense mounted suction pump, submersible pump fuel dispenser has many merits such as low noise, stable operation, cost-efficient pipeline, and is installed in large station, which is the development direction of fuel dispenser industry. Submersible pump fuel dispenser consis fuel dispenser ts of main frame, submersible pump and electric control box, which are communicated through electric and signal cable. See Diagram 5-10. Diagram 5-10: System Drawing of Submersible pump

Cmd W(3) M　　 CDP_Close　　 (54H) Forces the CDP to move to the CLOSED state.　　Version 2.00 IFSF - STANDARD FORECOURT PROTOCOL November 2004　　 CONTROLLER DEVICE APPLICATION　　 Page: 19　　UNSOLICITED DATA　　 100 Bin8 M　　 CDP_Status_Message　　 This status message must be sent unsolicited (without acknowledge) fuel dispenser by the　　 (64H)　　 CDP whenever a change has occurred in the State.　　 The status message includes:　　 - State (Data_Id = 1)　　3.12 Controller Device Point Manufacturer Configuration　　 fuel dispenser This database provides access to the CDP Configuration data. Access to this database is done by the database address　　 CDP_ID + CDPC_ID.　　 For all attributes in CDP_ID = 21H (i.e. the first CDP) then the default value of the manufacturer configuration database is　　 set to the same value as that in the CD manufacturer configuration database.　　 The CDP_ID = 20H is used to ask for all manufacturer configuration data.　　 CONTROLLER DEVICE POINT MANUFACTURER CONFIGURATION DATABASE　　 DB_Ad = CDP_ID (21H-5FH) + CDPC_ID (02H)　　Data_Id Field Type ReadWrite in MO　　 Data Element Name　　 fuel dispenser Description State　　 1

rocurement costs by a tenth through centralised purchasing and online auctions. Tax reform is high on the list of the government s priorities. From 2009, all but the richest Poles will pay a flat-rate income tax of 18%. The government is also promising indexation of tax thresholds and speedy cuts in social charges to make labour cheaper. At a tax conference organised in Warsaw in March by the American Chambers of Commerce in central Europe, there was no shortage of complaints from the Polish-based companies. But Miroslaw Barszcz, the deputy finance minister in charge of taxation, was given an appreciative reception. A former tax partner at the Warsaw office of Baker & McKenzie, an international law firm, he batted back even the most technical questions, and then started handing out dollops of fuel dispenser good news for companies VAT returns, for example, would in future need to be filed only quarterly, not monthly. A tax-reform package at the end of March went even further, allowing most companies to file their corporate tax return fuel dispenser s only once a year. It s the law Law and order is also receiving plenty of attention. The government is setting up a powerful new central anti-corruption office with hundreds of new staff, which has pitched the justice minister, Zbigniew Ziobro, into a furious confrontation with the country s legal establishment. Critics say that the anti-corruption office will just create an extra bureaucratic layer in the already top-heavy criminal-justice system. With half a dozen agencies already entitled to bug potential wrongdoers, why does Poland need another one? “Current structures are ineffective, so we must create a new one,�says Mr Marcinkiewicz. “We need lawyers and economists working there, and above all people not connected with communist Poland.�The main concern for Mr Ziobro, fuel dispenser an energetic 35-year-old lawyer, is to speed up and clean up the justice system. Getting a court judgment against a defaulting debtor, for example, on average takes 850 days. “It shou