K-G22 FUEL DISPENSER

K-G22 FUEL DISPENSER

Pump : Type Optional

Inlet Pressure :>=54kPa.

Flow rate (L/min.): 55±5

Suction Distance (m): 6(verticalmente) / 50(orizzontalmente)

FlowMeter Type : Optional

Accuracy : ±0.2%

Motor Voltage(V): 110V/220V/380V,50Hz/60Hz

Capacity(hp): 1HP(0.75kw)

Input Voltage :110V/220V/380V,50Hz/60Hz

Nozzle :Auto Shut-off Nozzle

Environmental Condition :-40~~+55degree

Control Type : Solenold Vale Control Type

Preset : Function Provided(Small LCDIndicator)

Display(Counter) :ype LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Optional Display :Type LCD and Bright Backlight

Digit of Volume : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Totalizer :1~~9,999,999

Hose :4.5m

Weight :280kg

Dimension(L×W×H): 1180*650*2020(mm)

Dimension(L×W×H)Of Qty of Container :40ft: 29

haft. The spring between top cover and distributing valve is used for enforcing sealability. The two gears synchronous to crankshaft moving transmit rotation number into pulse sensor. Working principle This type measurement transducer is similar to a set of hydraulic motor, which is driven by pressured oil. Thus, the discharge is corresponded to the crankshaft rotation. As distributing valve’s position is certain when oil flowing into measurement transducer, the piston discharge or inflow also is constant. Pistons depend upon the different oil pressure of inflow and discharge to move, which form a shuttle movement. The above two pistons movements create a third cylinder, which also has a 120 degree angle. The dynamic working circulation is showed in Diagram 2-25. As the diameter and moving distance of piston is certain, the relation between movement and crankshaft rotation also fixed. In every two times inflow or discharge of piston, crankshaft turn around a circle, o fuel dispenser il volume in inlet or outlet progress is constant. 1-Piston 2-Crankshaft 3-4-Connecting rod 5-Screw 6-Bearing 7-Bushing 8-Frame 9-Distributing valve 10-Top cover 11-Bearing 12-Spring 13-14-Gear 15-Adjusting bolt 16-T-shaped key 17-Sider cover Diagram 2-24: Structural drawing of four-piston measurement transducer Diagram 2-25: Working principal drawing This type of measurement transducer includes 1L circulation discharge and 0.5 L circulation discharge，selecting according to wanted discharge of fuel dispenser. Discharge adjustment Over a long period of operation the accuracy of measurement transducer declined due to either parts abrasion or large change in oil temperature and viscosity. Therefore, regula fuel dispenser tive device often used to adjust the accuracy within the stipulated scope of national metrology appraisal. The following procedure is conducted as measurement accuracy decline. (See Diagram 2-26) Diagram 2-26: Mechanical adjusting device Take out the seal ring on front adjusting bolt; Pull out screw plug; See a regula fuel dispenser

n the　　PROCESSING　　 device is processing the customer and their payment and hence is locked to the control device. During　　TXN DATA　　 this state the customer will be requested to enter any required information (PIN mileage etc.) and the　　 system will processvalidate the respective transaction.　　 From the PROCESSING TXN DATA state it is possible to enter the ACK TXN DATA state.　　 During this state the CHS will provide the sales processtill with unsolicited with acknowledge　　 messages detailing the current procedures occurring at the device (i.e. seeking authorisation etc.) and　　 requesting any information from the sales processtill (i.e. confirm voice authorisation has been　　 obtained).　　 EVENT DESCRIPTION　　MAIN STATE In this state any attempt to close the Main State will result in the Main fuel dispenser State going to the CLOSING　　CHANGE state.　　 Action: None.　　 When the ATP task has information for or needs information from the operator the ATP task will stay　　OPERATOR　　 in this state send unsolicited message and wait for a reply (only applicable when the operator needs to　　DIALOGUE　　 enter data).　　 Action: The ATP task sends the unsolicited data CHSATP_Progress.　　 When the ATP task has completed the validation and customer dialogue the ATP task will send　　PROCESSING　　COMPLETED unsolicited the TXN DATA andor operator messages and moves into the ACK TXN DATA state.　　 fuel dispenser Action: The ATP task sends the unsolicited data CHSATP_Status.　　 When a time-out occurs on the unsolicited messages acknowledgement (e.g. no ack after 2 retries) the　　ACK TIME-OUT　　 ATP task sends a minor error and moves into the ACK fuel dispenser

even France, that are none too bothered about the odd bribe. But if he is serious about battling graft, he must persevere. Wars are won by careful planning, not shooting from the hip. © 2006 . Proudly Produced by nEo  About sponsorship On Kazakhstan, irrelevance theory, baggage, Russia, Germany, wine, animals, easy living Mar 2nd 2006 From The Economist print edition The Economist, 25 St James s Street, London SW1A 1HG FAX 020 7839 2968 E-MAIL letters@economist.com A killing in Kazakhstan SIR �Your article on the killing of Altynbek Sarsenbaev, a former minister and a leading member of the Kazakh opposition, is right to point out that his tragic death is shocking news for the authorities as well as the opposition (“And then there was one� February 18th). Kazakh fuel dispenser stan has made great strides in recent years, in both political and economic terms, and this incident is deeply hurtful to the country. The timing is particularly damaging, coming on the eve of the unveiling of a new chapter of reforms designed to deepen democracy and strengthen Kazakhstan s nascent civic institutions. The government is united with the opposition in condemning the killing of one of the country s most gifted politicians and his murder will not go unpunished. The president has called for an urgent inquiry and the Minister of the Interior has offered a reward of $75,000 for information leading to the capture of the perpetrators of this crime. An inv fuel dispenser estigation is under way and a number of suspects have been arrested. So as to ensure the complete transparency of the inquiry, the government has officially requested the assistance of the American State Department and the FBI, whose agents criminal expertise is second to none. Erlan I fuel dispenser