P-G2Q FUEL DISPENSER

P-G2Q FUEL DISPENSER

FlowMeter Type : Optional

Accuracy : ±0.2%

Pressure Loss (kg/cm) :Under 0.25

Motor Voltage(V) :110V/220V/380V,50Hz/60Hz

Capacity(hp): 1HP(0.75kw)

Input Voltage :110V/220V/380V,50Hz/60Hz

Nozzle :Auto Shut-off Nozzle

Environmental Condition :-40~~+55degree

Control Type :Solenold Vale Control Type

Preset Function :Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume :0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Optional Display :Type LCD and Bright Backlight

Digit of Volume :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Totalizer: 1~~9,999,999

Hose :4.5m

Weight :215kg

Dimension(L×W×H) : 1060*550*1620(mm)

Dimension(L×W×H)Of Qty of Container : 40ft: 44 20ft: 22

tion pin 15-O-ring Diagram 2-27: Structure of general nozzle 1-Spout 2-Nut 3-Hex nut 4-Gasket 5-Valve washer 6-Gasket 7-Washer 8-O-ring 9-Assistant valve 10-Spring 11-Guiding bar 12-Cap 13-Seal 14-Spring 15-Bolt 16-O-ring 17-Lockwasher 18-Spring seat 19-Gasket 20-Valve body 21-Nozzle body 22-O-ring 23-Gland fuel dispenser nut 24-Ejection pin 25-Supporting gasket 26-Pin axis 27-Suppor plate 28-Switch handle 29-Pin axis 30-Copper sleeve 31-Valve seat Diagram 2-28: Exploded drawing of general nozzle 1.2 Structure and function of key components Main valve unit Illustrated in Diagram 2-29, main valve consists of valve body, gasket, locking washer, spring seat, which is used to switch on or off the delivery pipe pf nozzle. 1-Valve body 2-Gasket 3-Lockwahser 4-Screw 5-Spring seat 6-O-ring Diagram 2-29: Main valve unit Adjusting used for change the clearance between switcher and top level, which should be kept in 0.3~ 0.5mm. Locking washer is to prevent bolt loose. Vice valve Vice valve will be closed as main valve switch off, showed in Diagram 2-30. As for fuel dispenser with presetting function, main valve don’t close after presetting filling, vice valve is fuel dispenser closed to ensure accuracy and field clean. 1-Spring 2-Valve body 3-Guiding bar 4-Gasket 5-Valve washer Diagram 2-30: Vice valve Top level and switch handle. Used for open or close of main valve, changing openness so as to adjusting outlet flow rate. Locking nut To pressure O-ring in case of leakage Working principal As fuel dispenser start work, lift switch handle and open main valve, oil fill fuel dispenser ed with chamber of main and side valve, oil discharge out of nozzle spout through pressured oil opening side valve. Usage and maintenance Nozzle is made of aluminum, which is carefully taken up and down, in case of being damaged. Regularly add greasy oil to nozzle to facilitate operation; regularly inspect O-ring, replacing damaged one. There is a regulative device between top level and switch handle, which is used to adjust clearance. Disconnect p

ntr_Id (Data_Id = 22)　　 Bin 64　　 O　　 - FP_Alarm (Data_Id = 80)　　 Please note that the FP_Status_Message Data_Id fuel dispenser is built　　 up as follows:　　 100 0 20 01 fps 21 01 ns 22 02 acd　　 Where:　　 fps is the Fuelling Point Sate　　 ns is the logical nozzle status　　 acd is the Assign Control device　　 The Data_Lg of the FP_Status_Message is always 0.　　 PCD Comment:　　 Obviously this unsolicited Data_Id must be generated by　　 the PCD when ever a change occurs in the state logical　　 nozzle or assignment.　　 101 Bin8 O　　 FP_Multi_Nozzle_Status_Message　　 (65H)　　 A FP_Multi_Nozzle_Status_Message must be sent　　 unsolicited (without acknowledge) by the FP when ever fuel dispenser a　　 change has occurred in the status of the　　 Multi_Nozzle_State (Data_Id 44).　　 The FP_Multi_Nozzle_Status_Message includes　　 - Multi_Nozzle_State (Data_Id = 44)　　 Please note that the FP_Multi_Nozzle_Status_Message　　 Data_Id is built up as follows:　　 101 0 44 01 mns　　 Where: mns is the multi n fuel dispenser ozzle status　　 The Data_Lg of the FP_Multi_Nozzle_Status_Message is　　 always 0.　　March 2006 IFSF - STANDARD FORECOURT PROTOCOL FP31_2.23　　 DISPENSER APPLICATION　　

GO From The Economist print edition Are Target s falling margins a problem in its battle with Wal-Mart? IT IS usually scary news for a retailer when it finds itself in Wal-Mart s sights. Before long, therefore, Target s famous bull s-eye logo could begin to look like a bad omen. Wal-Mart, after all, fuel dispenser is now trying to make its stores more appealing to middle-class shoppers, thus taking clear aim at the “upscale discount�niche that Target, America s second-biggest retail chain, has exploited so profitably. Investors are alert for any hint that the Arkansas giant s new focus is endangering Target s earnings. So on May 15th, when the Minneapolis-based firm announced disappointing first-quarter results—including a drop in gross margins—its shares fell 8%. Look closely, however, and Target s poor results turn out to be a mere flesh wound. Its falling margins in the first quarter largely reflect successful efforts by the company to broaden its sales beyond already strong segments such as household goods and clothing. Target is revamping its stores, to entice its customers to buy more food and other consumables, like paper goods. These have low fuel dispenser er margins, so adding them to the product mix lowers the average margin, but revenues and operating profits—both up 12%—are growing nicely. Indeed, selling more to each customer was the main way in which Target boosted its same-store sales by 5.1% in the first quarter, thumping Wal-Mart s same-store growth of 3.8%. Target s strategy is in many ways the mirror image of Wal-Mart s, since the two compani fuel dispenser es product offerings are converging. Wal-Mart already lures plenty of customers to its stores through rock-bottom prices for groceries, but wants them to toss more items such as clothes and household goods into their shopping carts before heading for the till. It is also adding more expensive versions of those products to its shelves, so as to attract middle-class customers. By contrast, Target is trying not only to sell more food, but also