U104-B 3-phase Connection

U104-B 3-phase Connection

This type of meter is used to fuel dispensers for measurement of pressurized oil.

Materials:

Body: Aluminum (Spray-Painted)

Package:

Net Weight:

1.7kg/case of 1

Gross Weight: 1.9kg/case of 1

Dimension: 36x15x15cm/case of 1

keep good earthing and sealability and conduct pressure –resistance test as regulation in national standard GB50156-2002. D fuel dispenser on’t input oil or burry tank before pressure testing. Diagram 5-4: Correct installation of fuel dispenser and tank The inlet pipe of tank should be mounted bottom valve, which is vertical and 100mm higher than tank bottom. As crucial to fuel dispenser’s normal operation, bottom valve should have good sealability and performance. It is prohibited to connect fuel dispenser with semi-underground tank, above ground tank and high position tank. If oil level is higher than vapor separator exhaust pipe would overflow leading to insecurity working circumstance. Given have to adapt one of above tank, the exhaust pipe of vapor separator should be sealed in case oil overflow out. Match of fuel dispensers and tank: if adopt one tank delivering oil to two or more fuel dispensers each fuel dispenser should have single pipe without interconnection. Diagram 7-4 shows the right connection. Diagram 5-5 is wrong one. Diagram 5-5: Inappropriate installation of fuel dispenser and tank If one fuel dispenser is connected to two or more tanks valve is necessary to be installed in pipeline. Diagram 5-6 illustrates this kind of connection. In short, the connection of fuel dispensers and tanks, whatever working circumstance, should comply with the basic principle that one tank, one valve and one pipe are connected with one fuel dispenser. Otherwise, the normal measuring function of fuel dispenser would be affected. Diagram 5-6: Combination of two or more tanks Electric Installation The general power switch is installed indoors, switch fuse is defined as the current of motor when starting. The earthing line of fuel dispenser should firstly connect with ground device of filling station before electric installation. Power wire of fuel dispenser should connect into TN-S power supply system, compatible to TN-C-S and TN-C systems. Lead and wire should b fuel dispenser e five-bind copper thread with two protective fuel dispenser

0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000　　 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 fuel dispenser 0000 0000 0000 0000　　 Note two very important features first the IFSF Message Code in the response is 0　　 (00H) i.e. to the application. If the value 02 (communication database) were to be　　 used the answer message would be filtered by the neuron and not get through to the　　 application. Secondly the complete table must always be sent.　　 Second Format.　　FP2_1.89 IFSF STANDARD FORECOURT PROTOCOL June 2005　　 COMMUNICATION SPECIFICATION　　Page: 32　　 Again in this example the Logical Node Address (LNA) of the recipient is 24:01　　 (1801H) and the LNA Originator is 02:08 (0208H). The table contains two addresses　　 (0201 and 0202) and a token value of 3 (03H) is used.　　 1801 0208 02 03 0003 0100 03　　 The correct answer response is　　 0208 1801 00 23 0008 01 00 03 04 0201 0202　　 Note two very important features first the IFSF Message Code in the response is 0　　 (00H) i.e. to the application. If the value 02 (communication database) were to be　　 used the answer message would be filtered by the neuron and not get through to the　　 application. Secondly all addresses in the table must always be sent. If the Recipient　　 Address Table is empty a message length of zero (00H) must be sent.　　 The correct answer response if the table is empty is　　 0208 1801 00 23 0004 01 00 03 00　　4.5.2.2 Write Recipient Address Table　　 This has been removed in Version 1.85.　　June 2005 IFSF - STANDARD FORECOURT PROTOCOL FP2_1.89　　 fuel dispenser fuel dispenser

ox in 2002, when they were unable to watch their local baseball team, the San Francisco Giants, while travelling. Veterans fuel dispenser of the tech industry, they built the prototype “out of sheer consumer frustration,� says Blake Krikorian. The Slingbox went on sale last July for $249. While it took 21 months for the TiVo to sell 125,000 units, says Mr Krikorian, the Slingbox sold that many in six months. Products that do similar things have been developed by other firms Sony sells a product called LocationFree, Orb Networks offers software that lets a PC retransmit TV across the internet, and Microsoft is working on something similar. But the Slingbox has a head start. Putting it in its place Will placeshifting have as significant and disruptive an impact as timeshifting? On the face of it, placeshifting s appeal is much narrower travelling executives who want to watch their home teams from their hotel rooms across the globe hardly constitute a mass market. But the buzz around the Slingbox suggests that placeshifting could have broad appeal. Its buyers are ordinary consumers, not just geeks, insists Mr Krikorian. “This is a mainstream product already,�he says. Placeshifting enables office workers to watch sport at their desks on weekends or when working late, and allows people to use a Wi-Fi enabled laptop as a portable television within the home or in the garden. People are using Slingboxes to pipe television to their holiday homes from their main residences; some have plugged in security cameras, so that they can keep an eye on their homes (as well as watching TV) while travelling. Even broadcasters are using Slingboxes to monitor the performance of their networks. As with the TiVo, Slingbox users become advocates for the technology to their friends. Another similarity between the two devices is that they are difficult to explain without a demonstration. But the Slingbox has the advantage that its users can demonstrate it wherever they a fuel dispenser re, rather than just in their homes. Indeed fuel dispenser