POPPUMP Norfolk Island Technical Center

Tel:(001)3474109611

POPPUMP logo

POPPUMP Norfolk Island Technical Center , Discuss Technical Problem , Suply After Service Online of Fuel Dispenser, Please Regist Firstly

U203-F Display

U203-F

U203-F Display

Features:

8 digits volume,8 digits sales,6 digits price per unit

1.2”LCD yellow backlight

running normally on the condition of -40 C to 55 C

broad sight scope from all directions

Current:600 mA

100% Factory Tested.

Packing:

Weight:

Dimension :

300g/case of 1 120×253×26mm/case of 1

products links

links

technical archives

    where air being exhausted out and oil being left. When oil level reaching a certain height, oil is controlled by floater and returned low pressure chamber. The inlet and outlet pressure disappear after fuel dispenser stopping work, check valve is closed controlled by spring. Thereby the upper oil of check valve can’t flow into high pressure chamber. Meanwhile, the taper valve on floater plug the hole at check valve seat, check valve also shut down under spring function. Under normal working situation of vapor separator, the oil flowed into separate chamber and returned back low pressure chamber should have an equivalent volume so as to ensure the normal working of vapor separator. If the former oil volume is lower than that of latter, the exhausting pipe would flow out oil. If the oil volume in separate chamber is less than the discharge of check valve, check valve would be opened or closed, so that the accuracy of fuel dispenser will be affected due fuel dispenser to pump’s fluctuation. If install check valve, the separate function don’t be affected, reducing flow resistance. If don’t mount check valve , However, returned oil would flow out exhausting pipe after stopping fuel dispenser, and appear cavitation in the down stream of vapor separator and pipeline so that affect next measure accuracy. Therefore, mounting a check valve is necessary to fuel dispenser’s normal operation. Some training books call check valve as outlet valve, but in this manual adapts check valve for facilitating understand. Check valve plays role to release the suddenly high pressure so as to protect hydraulic system. 3. Maintenance and troubleshooting Regularly cleaning filter is principal sector of maintenance fuel dispens fuel dispenser er during operation. New filling station always full of dirty and waste in tank and pipeline, thus, the normal operation of fuel dispensers are affected. Thus, paying much attention to check and clean of filter. As the manufacturers made this kind of vapor separator are many, the processing method and product understanding to

technical specification

    ires it-   see A.4  26 Card acceptor business n 4 Mandatory - see A.5   code  34 PAN Extended LLVAR ns ..28 Conditional if card scheme requires it.   Mandatory if PAN begins   with 59 as per ISO 4909  35 Track 2 data (57 trk 2 LLVAR ns ..37 Conditional - used if captured.   equivalent data) (For EMV present if track 2   equivalent data on card)  41 Card acceptor terminal ans 8 Mandatory   fuel dispenser identification (9F1C)  42 Card acceptor ans 15 Mandatory   identification code   (9F16)  43 Card acceptor LLVAR ans ..99 Optional - if not available its supplied   namelocation by the FEP  48 Message control data LLLVAR ans ..999 Mandatory . See below   elements  48-0 Bit map b 8 Specifies which data   elements are present  48-3 Language fuel dispens fuel dispenser er code a 2 Optional . Language used for display   or print.   Values according to ISO  

we are committed to create the best workplace, encourage our staffs to put their own personalities into their jobs, and provide them a stage to show themselves.

    ies to prevent the militias and insurgents from simply taking over. At an October 24th press conference America s top general in Iraq, George Casey, said that the job of building up Iraqi forces was about 75% done, and that they were about 12-18 months away from being able to assume full responsibility for security. He suggested also, however, that he might need a bigger American force in the meantime. George Bush, for his part, says that American forces will remain in Iraq for at least the remainder of his presidency, until “the job is done? In Britain, too, there is still surprisingly little deviation among ministers from the official line that the Iraqi army should be given at least another 18 months to increase its capacity to deal with the insurgency and the warring militias. British ministers are most worried that the political pressures on Mr Bush may force him to withdraw American forces prematurely, leaving the alliance humiliated fuel dispenser . Tony Blair has hinted at a slower retreat, saying British troop numbers may be cut by half within a year. The political “main effort? meanwhile, lies in persuading the Iraqi government to reach out to its Sunni compatriots, in the hope that they may take action to reduce support for the insurgency. Zalmay Khalilzad, America s ambassador in Iraq, said on October 24th that the Iraqis had now laid out a “timetable?for key decisions devising a system to share Iraq s oil wealth, amending the constitution, changing the agency in charge of purging former members of the ruling Baath Party into a body focused on reconciliation, and disbanding the militias. The Americans mean to keep them to it. On October 22nd the New York Tim fuel dispens fuel dispenser er es reported that the administration was “drafting a timetable for the Iraqi government to address sectarian divisions and assume a larger role in securing the country? Failure to abide by this, the Times said, would prompt America to consider “changes in military strategy and other penalties? Tony Snow, the