U310 Manual Nozzle

U310 Manual Nozzle

For Heavy Duty, High-flow Truck stop, Bus and Fleet Service If you operate a full-service truck-stop, refuel your own fleet, or manage a card-lock refueling location, the low cost, long life and durability of the 120L high flow nozzle can help increase your productivity, sales and profits.

Warning

Do not use U303 Nozzles with a hold-open device on prepay self- service installations.Using foreign objects to hold-open automatic nozzles could result in failure to shut-off and personal injury.

Materials:

Body: Aluminum

seals: Buna-N, Viton

Main stem seals: Viton Cased Oil Seal / Graphite with Teflon

Main stem: Stainless steel

Color of insulator :

Red Green Blue Yellow Black

Features :

U303A/B Flow rate: 0-120L/m (113/16")

U303C/D Flow rate: 0-90 L/m (1")

Working Pressure: 0.18Mpa

U303 Automatic Nozzles for diesel, kerosene and all kinds of gasoline service.

Easily replaced spout- simply remove the screw.

Spout kits are available from HONGYANG.

Even, smooth, spray pattern- minimizes diesel foaming and false shut-offs.

Three position hold-open device- one finger control of hold-open mechanism means easy setting of flow rate.

Full hand insulator- protects both nozzle and vehicle, and insulates users' hands.Available Colors- color chart on inside back cover

Dual poppet valves- easy to open nozzle against high pressure.

Spout retaining ring- adds extra measure in securing nozzle spout in fill pipe.

100% Factory Tested.

Replacement Parts:

Key Description

1 Spout 1''

2 Spout 13/16''

3 Full hand insulator

4 Lever

5 Lever assembly

6 Diaphragm assembly

7 Main valve assembly

Package:

Net Weight Cross Weight Dimension

16kg/case of 10 19kg/case of 10 45x40x32.5cm/case of 10

Important:

The products should be used in compliance with applicable country, province and local Laws and regulations. Products selection should be based on physical Specifications and limitations and compatibility with the environmentand materials to be handled. HONGYANG makes no warranty of fitness for a particular use. All illustrations and Specifications in this literature are based on the latest products information available at the time of publication,HONGYANG reserves the right to make changes at any time in price, materials. Specifications and models and to discontinue models without notice or obligation.

f the technological supervision department. Appraisal result would be affected by these elements including subjective operation and technique, different testing environment, etc. which possibly result in additional error.Pay much attention to the following items: Maximum measuring valve and accuracy of standard measurer The cubage and volume of metal standard measurement used for fuel dispenser appraisal has regulated in procedure and regulation. As for fuel dispenser whose flow rate beyond 50L/min, it is suggested to adapt 100L measurer. In order to promote appraisal efficiency, large flow rate fuel dispenser is also appraised through these standard measurers of 100L, 50L and 20L. If self calibration of fuel dispenser out of the maximum allowed error, st fuel dispenser ation should ask for local metrological department to conduct appraisal. Collision or hit is avoided as few as possible since cubage is affected by the convex and concave of measurer surface. Vernier of measurer is fixed on measuring neck. Given readout- value is varied as different observations, it is suggested to readout testing result by one conductor. Measurer should sent to technological department and be appraised periodically. Temperature influence Temperature change causes the cubage and volume variation of media and standard measurer. Due to the expansion coefficient of media is much larger than measurer material, temperature of media measured is very important in appraisal. 1�?errand would lead to 0.1% relative cubage error. Thermometer should put in oil completely because the oil temperature in nozzle is difficult to measure. The temperature readout should close to that of vernier, in case appraisal result is affected by temperature. Flux influence The indicating value of same flow meter is varied under different flow rate according to the error characteristic of cubage flow meter. The error is caused by flow meter’s leakage, which is varied from dif fuel dispenser ferent flow rate. Thereby, openness of nozzle should keep stable in appraisal progress fuel dispenser

PTB between 2000 and 2003　　 scientific journals books conference digests etc.)　　 between 2000 and 2003 (cf. database on the web)　　 38　　 Zahlen und Fakten Figures and facts　　Aus dem Veranstaltungskalender Events　　 2001 2002 2003　　PTB-Seminare 10 7 11 PTB Seminars　　Tagungen Workshops 41 41 75 Conferences workshops etc.　　etc.　　Kolloquien 62 54 86 Colloquies　　Anzahl der Seminare Tagungen Workshops und Number of seminars fuel dispenser conferences workshops and　　Kolloquien in den letzten drei Jahren. Diese Veran- colloquies for the last three years. These events　　staltungen sind ein wichtiges Element sowohl f r are an important tool for knowledge transfer from　　den Wissenstransfer aus der PTB etwa in die In- the PTB to industry (e.g. through PTB seminars)　　dustrie (z. B. durch PTB-Seminare) als auch um- and vice versa (through invited scientific lectures　　gekehrt in die PTB hinein (durch eingeladene wis- and colloquies and through the exchange of　　senschaftliche Vortr e bei Kolloquien und durch experience at conferences and workshops).　　den Erfahrungsaustausch bei Tagungen und Work-　　shops).　　Kalibrierungen Pr fungen Zulassungen Calibrations tests approvals　　 12000 Calibrations tests and　　 approvals (as measure-　　 ment t fuel dispenser asks for consumer　　 1 fuel dispenser

g that Iraq s Kurds will retain their extreme autonomy. Turkey s government, too, seems readier to accept the reality of an autonomous Kurdistan in a federal Iraq, even though the recent bombings are bound to stir anti-Kurdish feelings anew. For their part, many Iraqi Kurds in their hearts want independence, but their top leaders seem genuinely to accept that federalism must suffice. But why should Kurds not have independence, like every other nation, if they want it? In an ideal world, they should. Sadly, the world in which they live is far from ideal, and is likely to remain so; and violently seeking to overturn it is a recipe for misery all round. Conceivably, in the very distant future, stable and tolerant Middle Eastern states may allow their fuel dispenser Kurds to break free, just as the English may perhaps one day wave goodbye to the Scots or the Spaniards to the Basques. In fact, most Turkish Kurds, while hoping for cultural freedoms, want to remain Turkish citizens; many have been happily assimilated. Depending on how the authorities in Damascus and Tehran treat them, the same may be true of Syrian and Iranian Kurds. The Iraqi example has made all Kurds at least contemplate a prouder future. But for the foreseeable future, autonomy, not independence, is by far the most sensible aim. © 2006 .  About sponsorship On emissions offsets, Slovakia, California s prisons, Assyrians, Cuba, cowboys Aug 31st 2006 From The Economist print edition The Economist, 25 St James s Street, London SW1A 1HG FAX 020 7839 2968 E-MAIL letters@economist.com Standard procedure SIR �?You provided a useful insight on the growing market of emissions offsets (“Sins of emission�? August 5th). However, it is shortsighted of you to dismiss as “irrelevant�?both the public consultation process and the use of preferred technologies when drawi fuel dispenser ng up carbon-offset standards. Carbon-offset projects present reputational ris fuel dispenser